Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
B-1.1, r. 6.1 - Regulation respecting pressure installations
Section 8
Disposition versions
8. Despite the provisions regarding the registration of designs provided for in the Manufacturing Code, the designs and specifications for piping and accessories of category A, B and C, manufactured in accordance with a standard recognized at the national level by the American Society of Mechanical Engineers (ASME), are not required to be registered with the Board.
The designs and specifications must, however, be kept for purposes of verification by the Board.
In force: 2018-03-08
8. Despite the provisions regarding the registration of designs provided for in the Manufacturing Code, the designs and specifications for piping and accessories of category A, B and C, manufactured in accordance with a standard recognized at the national level by the American Society of Mechanical Engineers (ASME), are not required to be registered with the Board.
The designs and specifications must, however, be kept for purposes of verification by the Board.
